EMG Series - Water-based Ferrofluid
Type: EMG 308

Ferrotec’s EMG 308 Ferrofluid is a member of Ferrotec’s family of EMG Series - Water-based ferrofluids. Unlike Ferrotec’s APG series of ferrofluids that have been optimized for audio speaker applications, Ferrotec’s EMG Series ferrofluids address a broad range of application requirements and can be used for experimentation and application development. Ferrotec’s water-based EMG Series are typically used in applications where rapid evaporation or the ability to mix ferrofluid into a water-based system is required. EMG 308 ferrofluid is Black-brown fluid and uses Anionic surfactant.

EMG 308 Specifications and Physical Properties

Appearance Black-brown fluid
Carrier Liquid Water
Nominal Particle Diameter 10 nm
  CGS Units SI Units
Saturation Magnetization (Ms) 66 Gauss 6.6 mT
Viscosity @27°C 2 cP 2 mPa·s
Density @25°C 1.06 g/cc 1.06 103 kg/m3
Initial Magnetic Susceptibility 0.04 0.50
Magnetic Particle Concentration 1.2 % vol.
pH 8-9
Nature of Surfactant Anionic

Ferrotec EMG Series - Water-based Ferrofluid Additional Information

For more information about material handling, refer to the MSDS (Material Safety Datasheet) for the EMG Series - Water-based family of products. 

Do You Need More Information?

For questions about specific ferrofluid series, ferrofluid applications, or to place an order, contact your Ferrotec ferrofluid solutions representative or use the Ferrofluid Inquiry Form.

Contact Sales