EMG Series - Water-based Ferrofluid
Type: EMG 408
Ferrotec’s EMG 408 Ferrofluid is a member of Ferrotec’s family of EMG Series - Water-based ferrofluids. Unlike Ferrotec’s APG series of ferrofluids that have been optimized for audio speaker applications, Ferrotec’s EMG Series ferrofluids address a broad range of application requirements and can be used for experimentation and application development. Ferrotec’s water-based EMG Series are typically used in applications where rapid evaporation or the ability to mix ferrofluid into a water-based system is required. EMG 408 ferrofluid is Black-brown fluid and uses Anionic surfactant.
EMG 408 Specifications and Physical Properties
Appearance |
Black-brown fluid |
Carrier Liquid |
Water |
Nominal Particle Diameter |
10 nm |
|
CGS Units |
SI Units |
Saturation Magnetization (Ms) |
66 Gauss |
6.6 mT |
Viscosity @27°C |
<5 cP |
<5 mPa·s |
Density @25°C |
1.07 g/cc |
1.07 103 kg/m3 |
Initial Magnetic Susceptibility |
0.04 |
0.5 |
Magnetic Particle Concentration |
1.2 % vol. |
pH |
~7 |
Nature of Surfactant |
Anionic |