EMG Series - Water-based Ferrofluid
Type: EMG 607
Ferrotec’s EMG 607 Ferrofluid is a member of Ferrotec’s family of EMG Series - Water-based ferrofluids. Unlike Ferrotec’s APG series of ferrofluids that have been optimized for audio speaker applications, Ferrotec’s EMG Series ferrofluids address a broad range of application requirements and can be used for experimentation and application development. Ferrotec’s water-based EMG Series are typically used in applications where rapid evaporation or the ability to mix ferrofluid into a water-based system is required. EMG 607 ferrofluid is Black-brown fluid and uses Cationic surfactant.
EMG 607 Specifications and Physical Properties
| Appearance |
Black-brown fluid |
| Carrier Liquid |
Water |
| Nominal Particle Diameter |
10 nm |
|
|
| |
CGS Units |
SI Units |
| Saturation Magnetization (Ms) |
110 Gauss |
11 mT |
| Viscosity @27°C |
<5 cP |
<5 mPa·s |
| Density @25°C |
1.1 g/cc |
1.1 103 kg/m3 |
| Initial Magnetic Susceptibility |
0.13 |
1.63 |
| Magnetic Particle Concentration |
2 % vol. |
| pH |
9-10 |
| Nature of Surfactant |
Cationic |
